Mini float valve
There are two mini float valve, Dn10wk and Dn8wk.
The internal locking plug take the moving method of straight way to stop the water, so it is very exact and high efficiency. The angle of the float ball can be adjusted, and the float valve can work under the pressure of 1.2Mpa.
And mini float valve has two way to install, which is called vertical installation and horizontal installation. And the length of installation can be 99mm,102mm,111mm and 115mm.
The body of the float valve made from injection molded, and the float ball made from poly ethylene. The length of the float ball is 62mm, and the diameter is 42mm.
The seals of the mini float valve all take the high performance silica gel. And take many optimal design to make the float valve reliable and long life.
Plastic Float Valve
We take several patented technologies to optimize the float valve , use the high quality engineering plastics and rubbers. So the float valve is reliable, durable, environmental, etc. And it can work under the pressure of 1.2Mpa.
The float valve has the following advantages:
1. Using a unique maintenance-free and self-cleaning technology to keep the inner from blocking.
2. The optimized design control channel to make the big flow rate and high efficiency.
3. Most float valve can be installed within the range of 360 ° in the box
We also can customize the float valve for customer(such as the float valve anti corruption of strong acid and alkali and nocuous gases)
Double Adjustable Float Valve
In the middle of the valve rod, there is an axis of rotation making the rear of rod can be turned. And the rear of the rod can be turned by the 7 gears regulating handle within 37 degree.
And there are some advantages when use this valve rod. By the method of turning the regulating handle, the height of the water stopped level can be changed while stop the water. By this way, the height of water stopped level will significantly higher than water opened level, and the maximum altitude difference is 110mm. So it reduce the frequency of opening and closing to reduce wear and extend the life
Pull line plastic float valve
Pull line plastic float valves are usually used in some big and deep water containers.It can be used in water tower,livestock farm and so on,It has two ways to install:level and vertical,which are also called horizontal type and vertical type.As there are two holes at the head of valve body. you can put the line through different holes to achieve horizontal or vertical installation. And the other end of line tied to the hole of float ball....
1) As the water fill in water box,the floats rise and up to the settled water level,then the valve will be closed by the line pulling force..
2) As the water level drop, tension will reduces between floats and valve body , then the spring which in the valve body forces the valve open, and the water fill in box again at this time...